hot and cold water kitchen faucet
|Terms of Trade:||FOB,CIF|
|Min. Order:||10 Bag/Bags|
|Delivery Time:||10 Days|
|Place of Origin:||Malaysia|
Model No.: ksk1123
We focus on designing each faucet to be functionally efficient. At the same time, it provides fashionable design, making it a perfect supplement to any kitchen. At the same time, it provides 360 degree rotary and spring loaded pressure adjustment spray bar's worry free washing experience, which provides perfect flexibility and water pressure, and saves you time. Our advanced locking technology will keep your spray bar butted and fixed when not in use.Modern Kitchen Faucets.Single Hole Kitchen Faucet.
KSK1123--C Polished Chrome
·Single Hole Installation or
· (For 3 Hole Installation:
Deck plate available upon separate request.)
·360° Swivel Spout
·2 Function (stream , spray) Pull-out Sprayer
·Quik-Connect 60” Flexible Sprayer Hose
· Packing: 6 PC/Box
1, the installation of single-hole basin faucet
When buying face basin bibcock of single handle, should notice to go to water mouth diameter, at present the majority on the market is hard tube enters water, notice to reserve conduit height, had better be about 30 inside from stage basin downward.When installation, must choose to match the special Angle valve, Angle valve must be fixed with the wall outlet cold hot water pipe.If there is a distance between the Angle valve and the faucet on the pipe, you need to buy special pipe to lengthen the link.Do not use other water pipes to connect, otherwise the water will leak and fall off due to the large water pressure.If the inlet pipe is too long than the outlet pipe, cut off the excess.
Note: do not bend the pipe hard to 90 degrees or more.When installing basin to go water, please do not forget to buy the small interface of bibcock (bibcock short connection).Water pipes buried in the wall must be flushed in advance before installation.
2. Installation of shower and bathtub faucets
If buy shower, bath, hang wall bibcock, that needs to choose appropriate height buries out conduit.Hot and cold water pipes are about 20 miles away.Flush the water pipe before installation to avoid damage to the faucet due to hard water quality.
Dark outfit shower, bath crock bibcock: after buying dark outfit bibcock, want to bury the valve core of bibcock commonly inside the wall.The thickness of toilet wall should be considered before pre-burial.If the wall is too thin, the valve core will not be embedded.Embedded when the valve core plastic protective cover do not easily remove, so as not to damage the valve core in embedded cement and other chores.In addition, when the embedded valve core should also pay attention to the valve core up and down, about the direction, so as to avoid the valve core buried wrong.
3. Installation of thermostats
Before installing constant temperature faucet, check which side of the next water pipe is cold water, which side is hot water, especially the cold and hot water pipe connected wrong, so as not to affect the future work of the faucet.Gas and solar water heaters cannot use thermostats, mainly because the water pressure is too low.Install thermostats and hot and cold water filters.
4. Installation of single hole kitchen faucet
Because the kitchen bibcock is used frequency is taller, move again move go loose extremely easily, all requirement is firm be taken for granted, because this lock nut must tighten.At present, building materials market has a batch of bibcock to enlarge the screw tube that nut fixes, super good firm effect.The obvious effect will be the trend of the generation trend.
SUNRISE HOME GOODS(M)SDN.BHD.
Established in 2010 in Malaysia , covering a total area of 15000 square metres. We have many advanced equipments own more than 50 trained workers plus 5 senior engineers,specializing in the production of all kinds of kitchen sinks, faucets and other stainless steel products. We have also passed cUPC certification and exported over 70 items of unde-rmount sinks and hand-made sinks to Canada and the United States. Laying a solid foundation for the development of foreign trade industry in the future. Since the establishment of the company has been 9 years, we try to meet every customer's requirements and dedicate to excellence in product design, manufacturing, quality control, competitive pricing and reliable service. So quickly we built a extensive distribution network which brought us a big development in USA, Canada and Europe market . Welcome to take visit to our factory. We look forward to cooperating and associating with you to create bright future together!
- Company Name: SUNRISE HOME GOODS(M)SDN.BHD.
- Representative: Kenny Rong
- Product/Service: Kitchen sink , Kitchen faucet , Handmade sink , Sink Accessories
- Capital (Million US $): 500,000RMB
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 5
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Lot41,Kawasan Perindustrian Ringan Sungai Siput
- Contact Person: Mr. kenny
- Tel: 86-0750-13631847895
Premium Related Products