Find Tainless Steel Self-priming PumpS, Safety Explosion-proof Pump, Good Quality Electromagnetic Pump on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Stainless Steel Check Valve > JMZ stainless steel self-priming pump

JMZ stainless steel self-priming pump

  • JMZ stainless steel self-priming pump
  • JMZ stainless steel self-priming pump
  • JMZ stainless steel self-priming pump
  • JMZ stainless steel self-priming pump

JMZ stainless steel self-priming pump

    Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,FCA,CPT
    Min. Order: 1 Set/Sets
    Delivery Time: 15 Days
    Packaging: wooden box
    Productivity: 500
    Brand: BODA
    Transportation: Ocean,Land,Air
    Place of Origin: china
    Supply Ability: 500
    Certificate: ISO9901
    HS Code: 4101201190
    Port: Tianjin,Qingdao,Shanghai

Basic Info

Model No.: BODA-124

Product Description

JMZ stainless steel self-priming pump 6

JMZ stainless steel self-priming pump 00

JMZ stainless steel self-priming pump 4

JMZ stainless steel self-priming pump 22


JMZ stainless steel self-priming pump overview

Stainless steel self-priming pump JMZ, FMZ type adopts new mechanical seal assembly, safety explosion-proof, long-term leak-proof, suitable for conveying -35 degrees +80 degrees of various alcohol, beverage, dairy, pharmaceutical, gasoline, solvent oil, syrup, etc. Suction times over 40 degrees will be significantly reduced). JMZ, FMZ stainless steel self-priming pump has the characteristics of compact structure, simple operation, small size, light weight, stable performance, no need for bottom valve, no need for irrigation during start-up, JMZ, FMZ stainless steel self-priming pump after replacing 3-4 parts It can be used to transport thick liquid, acid, alkali, salt and other liquids. JMZ, FMZ stainless steel self-priming pump

Performance range:

The flow rate is 3m3/h-100m3/h

Head is 18m-14m

The diameter is 25mm-150mm

Model meaning of JMZ stainless steel self-priming pump

Example: 40 J M Z - 30 T

40: Import caliber (mm)

J : J is the wine pump, F is the acid resistant pump

M : M stands for high quality stainless steel

Z : Z is self-priming, T is mobile, G is fixed

30: Head (m)

T : T: indicates the export or flow of special requirements

installation

1. The pump can be used according to the "Pump Profile Mounting Dimensions" to determine the base and determine the foot bolts. However, it is good to wait until the pump is delivered to the present sound and then carry out the construction according to the size of the base.

2, the pump is installed on the foundation, the level of the unit can be adjusted with the horn, the level of the motor shaft will be checked with the level meter, the concentricity of the pump shaft and the motor shaft should be re-examined and adjusted, and the flat ruler and the feeler gauge of the motor are used. The difference between the outer circle, upper, lower, left and right of the coupling shall not exceed 0.15 mm. The deviation between the end faces of the two couplings does not exceed 0.2 mm.

3, do not use the pump to bear the weight of the pipeline, the pipeline should be received by the pipeline support equipment.

4. Press the end of the application to turn the coupling to see if it is easy and flexible, and there is no stuck.

Disassembly

1. Unscrew the four screws that connect the bearing body to the pump body and loosen the mechanical seal and the pump cover.

2. Unscrew the impeller (right-handed) and remove the impeller, key and pump cover, and then remove the mechanical seal from the pump cover.

3. Pull down the coupling with a puller and then remove the key, the bearing end cover, and then disassemble the shaft and bearing.

4. The assembly sequence of the pump is reversed as described above.

5. When reloading the inlet bundle of the suction pump, please note that the water blocking valve should be facing to the front so as to fit the front of the water blocking valve to ensure self-priming effect (see the figure below right).

Mechanical seal installation

1. When replacing the mechanical seal, pay attention to the specifications and the models must match the original ones.

2. During the installation of mechanical seals, it should be kept clean and the seal originals must not be knocked to prevent damage and damage.

3. When installing the size seal valve and the static and dynamic ring, the surface should be coated with a layer of clean oil and transparent oil.

4. Install the static ring and the large apron into the pump cover and then attach them to the shaft (note: the moving ring pin must be aligned with the impeller's drive hole).

5, the bomb seat, the spring, push the composition - body. With the spring seat as the working point, push it onto the main shaft, the thrust of the spring is 2-4mm after the spring is slid on the shaft. If the spring is not compressed, it can slide. It means that the moving ring and the main shaft are loosely loose, and the friction is small. If the spring is contracted more than 6mm, the moving and sealing ring can not slide on the shaft, indicating that the tightening should be tight. To check if the mechanical seal is consistent with the original.




Shijiazhuang Boda Industrial Pump Co., Ltd.

 

Shijiazhuang Boda Industrial Pump Co.,Ltd is a corporation working for international pump market in P.R.C.. It mainly operates pump & pump driven equipments, pump parts & resistance wearing castings, Others hydraulic machinery, accessories etc. The products contain slurry pumps, API 610 petrol-oil & chemical pumps, waters pumps which have tens of series , more than one hundred varieties , thousands of models. They are widely used in mining, metallurgy, coal mining, electric power, petroleum, chemical , water supply and drainage industry and so on. The company have one slurry pump factory in Shijiazhuang city , one API610 pump factory in Shenyang city, one chemical pumps factory in Dalian city.


Boda is specialized in the manufacture and sales of slurry pump and pump parts. The slurry pumps are designed for the harshest abrasive and corrosive pumping environments. They can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency. Also they are parts interchangeable with one of the most recognized brands worldwide in the slurry pump business.


It is our eternal pursue to do our best to meet the customer's requirements. We are always maintaining the operation principle [First class quality, Advanced technique And Best service". We receive the reputation of several firms in the world for high quality, fair price, in time delivery. Our company has a company tenet ' Moral Team, Good Quality Product, Brand Service' and a principle 'Quality is No.1, Customers are Paramountcy' in order to provide clients an excellent product and satisfied service.

Company Info

  • Company Name: Shijiazhuang Boda Industrial Pump Co., Ltd.
  • Representative: JUN LIAN BAI
  • Product/Service: Horizontal Slurry Pumps , Vertical Slurry Pumps , Gravel Dredger Pumps , API610 Chemical Pumps , Sewage Wastewater Pumps , Centrifugal Water Pumps
  • Capital (Million US $): 26,000,000RMB
  • Year Established: 2007
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 41% - 50%
  • Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
  • No. of Production Lines: 4
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 1,000-3,000 square meters
  • Factory Location: North of Shilipu Village, Chang'sn District, Shijiazhuang, China
  • Contact Person: Ms. alisa
  • Tel: 86-311-89255090
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters